Page

Lathe machine parts name and functions

05.11.2019

images lathe machine parts name and functions

Loading playlists It is bolted on the spindle which rotates the chuck and work piece. The spindle speed plays a huge role during cutting. Head Stock, which is the actual holding device and rotates the piece. Even if you go to the trouble of making up a pulley system to reduce the spindle speeds you will find the torque needed to turn large diameters at low speeds causes the belts to slip. The carriage is one of the most important parts of the lathe tool and it will serve as a supporting, moving and controlling part of the cutting tool. The main function of the Tail stock is to provide bearing and support to the job which is being worked between. Carriage moves along x-axis on lead screw and feed rod. Pingback: Types of Grinding Machine - mech4study.

  • Lathe Machine (PDF) Definition, Parts, Types, Operations & Specifications
  • Lathe Machine All Parts and Functions with Diagrams and Uses
  • Different Parts of Lathe Machine and Their Functions Print Screw Gear
  • What are the parts of a lathe machine Quora

  • Lathe Machine (PDF) Definition, Parts, Types, Operations & Specifications

    There are many types of. Previously I posted an article about the different parts of a lathe machine. In this article I will try to discuss all the functions of the parts in details. It is combination of many parts which works together to perform a desire function.

    images lathe machine parts name and functions

    A lathe machine is used to machine cylindrical work piece.
    For Later. Ray Ramilo. It is a long shaft having a keyway extends from the feed box across and in front of the bed. Some makers have been known to label the "Top Slide" as the "Compound Rest" or even the "Compound Slide" - but as "to compound" means the 'joining of two or more' - not 'one' - this use of the term in incorrect.

    Lathe Machine All Parts and Functions with Diagrams and Uses

    Lathe machine parts and functions Lathe operations Lathe machine working explained with diagram.

    images lathe machine parts name and functions
    LYRICS HETKI ON KAUNIS KORU
    Its function is to provide cross feed of the tool and its movement is perpendicular to the center of the lathe machine. May 7, February 23, Admin 11 Comments.

    In its "neutral" position it also allows the headstock spindle to rotate freely and quietly without having to drive the screwcutting changewheels and leadscrew.

    Video: Lathe machine parts name and functions Centre Lathe Description -All Parts Name and their functions

    The following are the main parts of lathe machine. There are many types of lathe machine but each machine consist some basic part which are essential for its proper working.

    Lathe machine is one of the important tools for design or shape any metal part.

    Here you will know most imp lathe machine parts & there uses. Parts of Lathe Machine The following are the main parts of lathe machine.

    Different Parts of Lathe Machine and Their Functions Print Screw Gear

    Sitting on top of the "Saddle" is the "Cross Slide" - that, as its name implies, moves across the . What are the functions of headstock and tail stock in lathe machine?

    › lathe-machine.
    Muhd Rifdi Che AbRahim. It cut the metal from work piece. Report this Document. Some very large lathes have a "sliding bed" where the upper part, on which the carriage and tailstock sit, can be slid along a separate lower part - and so make the gap correspondingly larger or smaller.

    The prevailing practice is to use cast legs.

    What are the parts of a lathe machine Quora

    images lathe machine parts name and functions
    Lathe machine parts name and functions
    To enable this, the tail stock is made to possess a number of parts which collectively help in its successful function. Muhd Rifdi Che AbRahim.

    Backgear : As its name implies, "backgear" is a gear mounted at the back of the headstock although in practice it is often located in other positions that allows the chuck to rotate slowly with greatly-increased torque turning power.

    Chuck: Chuck is used for mounting of metal pieces which are not round shape while having a triangular or square shape. Did you find this document useful? Head stock is the main body parts which are placed at left side of bed.

    images lathe machine parts name and functions

    Eric Bai Recommended for you.

    Only registered users can comment.

    1. Quick-action "Sliding-cam" mechanisms are occasionally used as on the Drummond and Myford M Series lathes where a knob on the face of the Bull Wheel has to be pushed sideways, and so ride up a ramp, which action disengages the connecting pin automatically. Quick Change Gearbox: Controls the movement of the carriage using levers.

    2. The leadscrew, and sometimes a power shaft as well, are often arranged to pass through the apron and provide it with a drive for the various functions.